Metalmaster HM-54GV Geared Head Turret Milling Machine Vertical & Horizontal

Price is ex-Adelaide (Please note this item requires a forklift to unload. Please contact us for freight costs) Overview This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 2.2kW / 3hp vertical motor and a 2hp motor for the horizontal spindle, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector lever mounted on right side of milling head allows for quick change off speed range. Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, coolant system, X axis power feed unit, drill chuck, 1″ & 1-1/4″ horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation. Extra Features: Swivel table 1″ & 1-1/4″ horizontal arbors Features Electronic inverter variable spindle speeds 3 Axis digital readout system Swivel table left & right with graduated scale Mill head tilts to ±45º left to right 450mm horizontally sliding and rotating ram NT30 Horizontal and vertical spindles that are hardened and ground Precision-ground dovetail slide-ways and table Precision milling table incorporating machined T slots Rear concertina slide-way cover Forward and reverse button switch Fine hand wheel operated quill feed Swarf & splash tray Spindle lock for quill Metric dial graduations @ 0.02mm for X , Y & Z-Axis Vertical quill hand-wheel dial graduations @ 0.05mm All slides utilise dovetail construction for maximum rigidity Includes 1″ & 1-1/4″ arbors for the horizontal spindle * Note: X & Y travels maybe reduced due to digital readout scales and safety stops * Note: Optional Y & Z power feeds require additional parts & fitting (not included) Includes Electronic inverter variable spindle speeds 3 Axis digital readout system X-Axis power-feed Safety cutter guard Swarf tray Coolant system LED work light Drill chuck & arbor NT30 to 3MT adaptor 2MT & 3MT adaptors MODEL HM-54GV Digital Readout 3-Axis Digital Readout Type Vertical & Horizontal (mm)Table Size 1000 x 240 Spindle Taper – Vertical NT30 Spindle Taper – Horizontal NT30 (mm)Longitudinal Travel (X-Axis) 600* (mm)Cross Travel (Y-Axis) 200* (mm)Vertical Travel (Z-Axis) 340 Type of Slides Dovetail (mm)Ram Travel 450 (mm)Spindle to Table 375 (mm)Spindle Travel / Diameter 120 / 90 (mm)Throat Depth (max.) 640 Tilting Head (Left ~ Right) ±45º Tilting Head (Forward ~ Back) Fixed (mm)Drilling Capacity 40 (mm)End Milling Capacity 25 (mm)Face Milling Capacity 80 (mm/rev)Power Feed – Quill Manual (mm/min)Power Feed – Longitudinal (X-Axis) 20 – 2000 (mm/min)Power Feed – Cross (Y-Axis) Optional * (mm/min)Power Feed – Vertical (Z-Axis) Optional * (inch / mm)Table T-Slot Size 14 (kg)Work Table Load Capacity 160 (No./ rpm)Spindle Speeds Vertical Variable (100 – 2000) (No./ rpm)Spindle Speeds Horizontal 9 (60 – 1350) (kW / hp)Motor Power – Vertical 2.2 / 3 (kW / hp)Motor Power – Horizontal 1.5 / 2 (V / amp)Voltage / Amperage 240 / 10 (cm)Shipping Dimensions (L x W x H) 134 x 114 x 225 (kg)Nett Weight 900